A Peek Into How Much Is A Ghost Immobiliser's Secrets Of How Much Is A Ghost Immobiliser

A Peek Into How Much Is A Ghost Immobiliser's Secrets Of How Much Is A Ghost Immobiliser

Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to protect cars from key cloning or hacking, is a discreet device which can be installed without causing damage to your vehicle. It prevents your vehicle from starting until you press an exact sequence of keys within your vehicle like a password on a mobile phone.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by stopping the engine from running until it has the correct PIN code. This is done with no modifications to the vehicle and is completely undetectable to thieves. The unit connects directly to the ECU via the CAN databus to immobilise the vehicle. This system is very similar to the one car manufacturers have been using in their cars for many years, however, the thief cannot add a new key or use key relay technology to bypass it, as they could with factory-installed systems.

Ghost is compatible with all vehicles with an engine, including cars, vans, motorhomes and caravans as well as bikes. The same system can be used on electric cars. It's a great alternative to locking the steering wheel and wheel clamps and can be installed with minimal effort.

When the Ghost is armed it will block all buttons in your car and stop the ignition from being started unless a PIN code has been entered before. This can be accomplished using the Android or Apple mobile app or by manually entering the code through your key fob. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to start again. This is a great way to discourage thieves. If the vehicle can't be started, they will move on.

The Ghost is small weatherproof device that can be concealed in the most difficult to reach parts of your car. It is incredibly easy to install, taking an average of 20-30 minutes for each vehicle. It is also very easy to remove if you decide to move your vehicle around or return it for service or valet parking. It is an TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system that is recognized by a few insurance companies. It also comes with a secure emergency Pin Code Override, and the Service/Valet feature that can be activated by pressing a button on the app or by using your key fob.

Disarm

Ghost immobilisers are not mechanical anti-theft devices that can be removed, are hidden in the car. Even if they were discovered, thieves would not be able to start the vehicle. They are nearly impossible to bypass or hack. A ghost immobiliser is protected from key cloning as well as devices spoofing signals and signal jamming. These are methods that thieves employ to gain entry to vehicles that have standard immobilisers.

The immobiliser transmits a code to the ECU. If the wrong code is received, the vehicle cannot be started as the engine will not fire up. It is possible to disable a ghost immobiliser with a software tool, but it is extremely difficult and time-consuming to accomplish this. The software can only be installed and used by an authorized installer.

The Ghost immobiliser is a tiny system that sits within the wiring loom of your vehicle and is invisible to the naked eye once installed. It doesn't show up on diagnostic systems. There are no LED indicators, and it does not communicate with the engine via the OBD port. It communicates in silence through the CAN data loop.

The system will stop the vehicle from starting unless it is able to receive a user-defined PIN code sequence. This can be entered using buttons on the steering wheel or door panels, or on the centre console. This is a much safer way to safeguard your car as it does not require keys or remote control.

Ghost also comes with a service mode that can be turned on via the mobile application. This lets you hand over your keys to someone else to use for valet parking or service, without the need to enter the disarm sequence.

No matter if your Ghost is in service mode or not, you should not attempt to remove the system by yourself because it could affect the engine and cause damage. It is recommended to contact a TASSA verified installer who can remove the system in a safe and secure manner. Our most recent GHOST II immobilisers come with an exclusive QR fingerprint sticker that is hidden in various locations of your vehicle. they are linked to our international security register. In the event the system is removed and is sold on the black market, it will be linked back to its original owner.

Anti-Hijack

The anti-hijack feature is an essential feature of the Ghost Immobiliser 2. This system works like an intelligent key and is one of the most secure methods to protect your vehicle from theft. The Ghost system will automatically activate the hazard light and stop the car's engine when the ignition is on and the vehicle is in a stationary position. This gives the driver or passenger time to press a secret security button (depending on the vehicle) before the system is activated and the engine is once again allowed to begin.


The Ghost system, unlike most competitors, uses a timer and controller unit that will close the valve for shut-off of fuel 14 after a predetermined period of time. This is regardless of whether the ignition is on. The delay time frame needs to be long enough to allow the hijacked owner of the vehicle to move away from the location of the hijacking and a sufficient distance from the vehicle that is stalled before the system can reactivate.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it comes with an additional level of security that prevents common hacking techniques used to gain access to modern vehicles, such as relay attacks keys range extending, relay attacks and ECU swapping. This is due to the fact that the Ghost system communicates silently and doesn't emit any signals that can be detected by a criminal using codes or RF scanning technology.

The Ghost system comes with an option for service or valet mode that allows your vehicle to be temporarily started and driven, without the need for a PIN code. This is great if you park your car and only require it to be left for a short time for a few minutes, like to open the garage door or place groceries in the boot. The system will be able to exit service mode based on speed and time or by using the easy PIN code input process and give you assurance that only YOU are able to utilize your vehicle!

Keyless Entry

With the growing trend in theft of cars using contactless technology, many people are considering additional security options. This is particularly true for those who have put in time or money in personalizing their vehicle or own expensive vehicles. A supplementary immobiliser is an effective way to avoid this type of theft as it can stop your vehicle from starting unless the proper pin code is entered into your key fob.

Immobilisers are designed to be used on a variety vehicle circuits including those that control starter motors and fuel pumps. They also can shut off the car alarm in order to draw attention and scare off any potential thieves.

auto ghost immobiliser  connect directly to the engine control unit through the CAN data network. They hinder thieves from gaining access to it by installing a new ECU or by using key programmers. The immobilisers can be installed discretely inside your vehicle, leaving no trace and are completely undetectable by the tools that sophisticated thieves use.

The Ghost immobiliser differs from other systems which require the driver to wear tags or an app. Instead, you can select your own pin sequence by pressing the pattern on your steering, door panel, and the centre console. The pin can be easily changed, making the device as secure as a credit card. It's also more difficult to crack since it requires as many as 20 press.

Ghost also offers Valet/Service mode, which allows you to disable it if you are going to give your vehicle for valet parking, or for service. This allows the system to function within certain parameters such as a 30 mph speed limit. It can then be reactivated by using the original key or key that corresponds to the entry code.

Installed by our accredited installers It is the most secure and effective aftermarket CAN-immobiliser on the market. It is also certified by Thatcham for insurance purposes. The Ghost 2 immobiliser is also provided with six QR fingerprint labels, an ISR contact card that contains your unique QR code, as well as a secure emergency code that are kept in your purse or wallet of your vehicle.